How To Use Autocad Draw A Sliding Door

[AutoCAD Video Form] How to draw a rectangle in the program past size, coordinates

Rectangle AutoCAD

---

AutoCAD drawing control

Rectangle

Definition

A rectangle is geometric apartment effigy - parallelogram, whose opposite sides are equal and all angles are right. long side of rectangle is chosen length of rectangle, and curt side is called width. rectangle in AutoCAD is 2-dimensional airtight polyline consisting of four line segments.

Tool

Rectangle tool builds rectangular 2nd polyline using specified rectangle parameters (length, width, rotation angle) and type of corners (mate, chamfer or directly).

Command

Rectang/Rectangle

Object

Polyline

You can describe rectangles in AutoCAD using Segment command or Polyline command. However, y are quite often establish on drawings, so developers came up with special command Rectangle. In older versions of program, command proper name is abbreviated: "Straight". In new versions of system, later having worked well with localization (y translated reference book), team began to wear full name - "Rectangle".

Rectangle command

By default, cosmos of rectangles in AutoCAD is based on specifying location of its ii diagonally reverse vertices. constructed rectangle is located parallel to axes of current UCS.

Yous can phone call Rectangle tool in following means (start its construction):

• you lot can create rectangles in AutoCAD from menu bar, item Drawing - string Rectangle;
• You tin can draw it from tool ribbon; Abode tab of tool ribbon — in Cartoon group, Rectangle push;
• Y'all can depict rectangle in AutoCAD from archetype Drawing toolbar - Rectangle button;
• You tin draw rectangles by typing command name in control line Rectangle.

How to build rectangles in program by default

Later on invoking Rectangle command in AutoCAD, command prompt appears:

Specify point of first corner:

In response, nosotros indicate location of i of its corners. We introduce coordinates of first bending with mouse. Afterward specifying first angle, rectangle will be displayed in AutoCAD from lines that will follow cursor arrow from point you specified. size of rectangle when yous motility cursor will alter. north post-obit query will appear:

Specify point of second corner:

In response, to which we volition set betoken of contrary bending diagonally with mouse.

A rectangle of two points built.

How to draw rectangle in AutoCAD arrangement by size using relative coordinates

You lot can build in AutoCAD rectangles of given length and width (according to ir size), using relative coordinates when specifying signal of second corner. Accordingly, displacement of point of second angle relative to point of offset bending along centrality "X" sets length of rectangle, and along axis "Y" its width.

Suppose we need to build rectangles in AutoCAD xxx mm long, l mm wide.

Call tool Rectangle. Specify betoken of first corner, and as coordinates of 2nd corner, enter relative coordinates @ thirty.50.

Cartoon rectangle in AutoCAD special ways

At beginning of work of Rectang command (after telephone call), five options are available to us, and after specifying showtime corner point, 3 additional options of command that allow building AutoCAD rectangles in special ways. Using se options, you can construct rectangle with cutting or rounded corners in AutoCAD or draw it with line of given width. You can create rectangle past specifying desired dimensions (length, width), rar than specifying coordinates of point of 2d corner, etc.

Note

Past changing properties of rectangle of AutoCAD, y will be saved until you change m again. properties of created objects tin exist monitored on command line.

Consider options tool Rectangle.

How to depict rectangle in AutoCAD size to specify length and width

You tin can not fix location of point of second corner, but specify length and width of rectangle (its dimensions) in AutoCAD. "Dimensions" option is responsible for this function of Rectang command.

Build AutoCAD rectangles by size: length 40 mm, width 20 mm.

Telephone call tool Rectangle, due north specify location of point of its first corner. Select "Dimensions" command option. following prompt appears on control line:

Rectangle length:

You tin can enter length of forty mm in command line or past specifying ii points in cartoon with mouse. Enter value of its length 40 mm in command line. Press "Enter". Next, query appears:

Rectangle width:

Enter value of width of 20 mm in command line. Press "Enter". query appears:

Specify point of second corner:

those. you must specify orientation of rectangle, since first point and dimensions are already known. Y'all can do this by clicking in desired position. preliminary sketch of rectangle volition motility mouse pointer around point of first corner until its orientation is indicated. re are four possible orientations of rectangle in size (see picture).

Constructing rectangle in size: (length or width) and surface area

Foursquare choice of Rectang command allows you lot to build rectangle of AutoCAD of given area and i side (length or width). Its second side will exist calculated by area.

Create rectangle of 100,000 mm² and 500 mm long.

Call control Rectangle, due north specify point of first corner. Select option "Area". At command prompt appears:

Enter area of rectangle in current units:

Enter in control line value of 100,000 mm². Press "Enter". query appears:

Calculate rectangle dimensions based on [Length, Width]:

Select option "Length". command prompt will prompt:

Enter length of rectangle:

We introduce value of 500 mm.

AutoCAD rectangle of given dimensions will be built, and its width volition be automatically calculated and will be 200 mm.

Attention!

choice "Expanse" takes into account possible chamfers and mates of corners of rectangles.

How to build rectangle at an angle to horizontal (positive X centrality)

Call control Rectangle in AutoCAD, n specify signal of first corner. Select option "Rotate". command prompt will prompt:

Specify rotation angle or [Selection Point]:

those. yous must enter value of rotation angle of AutoCAD rectangle or you can select "Pick Points" option and specify its rotation angle with two points using mouse. Enter value in command line 30 degrees. Specify location of second corner point by clicking.

Rectangle AutoCAD congenital at an bending of 30 degrees to horizon.

How to draw rounded rectangle in AutoCADи

Construct rectangles with rounded corners in program by size: length 100 mm, width 50 mm, radius of conjugation of corners 10 mm.

Call control Rectang, n select selection "Pair". At command prompt appears:

Rectangle pairing radius:

in response to which we enter conjugation radius of x mm.

Attention!

If length of curt side of rectangle in AutoCAD is less than length of two conjugation radii, n angles of such rectangle will remain straight.

Adjacent, specify point of first corner. Select selection "Dimensions" command Rectang. Let us introduce in turn value of length 100 mm and width 50 mm. Nosotros determine its orientation relative to point of first corner past clicking mouse. Rectangle size in AutoCAD built.

How to draw rectangles with cut corners

Construct in program rectangles with cut corners in size: length 500 mm, area 100000 mm^two, chamfer xxx×30.

Telephone call command AutoCAD Rectangle, n select choice "Chamfer". At command prompt appears:

length of starting time chamfer rectangles:

Although "Selection Points" choice is non displayed, you can set offset chamfer length past specifying ii points in drawing with mouse or by entering value in control line xxx mm. post-obit query appears:

length of 2nd chamfer rectangles:

Enter length of 2d chamfer of rectangle 30 mm. Specify point of commencement corner, north select choice "Area". Enter area value of 100,000 mm². Select option "Length" and enter value of its length 500 mm.

Rectangle in AutoCAD preset sizes built.

In one case once again I draw your attention to fact that "Square" pick took into account chamfers constructed past "Chamfer" option. automatically calculated width of rectangle in AutoCAD was 203.vi mm.

Rectang tool's Level, Height, Width options are mainly used in 3D modeling, and then we'll not consider m hither.

Annotation

Over fourth dimension, I promise programme developers will introduce boosted information fields for entering length and width of rectangle when dynamic input display is on, which will eliminate use of some options of "Rectang" command.

Useful lessons and related topics

I recommend to go acquainted with similar lessons on AutoCAD:

• choice in AutoCAD rectangle;
• how to paint rectangle (department Hatching | Gradient);
• how to build regular polygon.

Read and see also:

• how to draw objects.

Courses, tutorials AutoCAD:

1. 2D design.
2. 3D modeling.
3. descriptive geometry.
4. Engineering science graphics.
5. House plan.
6. Associates drawing of spur gear.
7. 3D kitchen model.

Video "How to depict rectangles in AutoCAD and regular polygons"

This video tutorial and commodity is included in professional gratis video course, which is suitable for both novice users and has long been working in program.

Source: https://drawing-portal.com/en/creation-of-objects-in-autocad/rectangle-in-autocad.html

Posted by: welchnotheeptist.blogspot.com

Share this post